Description: MG Hydraulic Oil VG-46 is a premium quality general purpose anti-wear hydraulic fluid containing a zinc/phosphorous additive to minimize wear and provides superior thermal stability, anti-foam, rust, corrosion and oxidation protection in high speed, high pressure vane, gear, and piston pumps operating over a wide temperature range. It is formulated according to the ISO viscosity grade classifications to perform in extended service intervals to reduce downtime and increase time between equipment service. MG OIL Hydraulic VG-46 anti-wear Hydraulic oil meets, exceeds or match the performance specifications and complies with most industrial, marine and mobile applications where service requirements are normal to moderate and long-term, heavy-duty wear protection for stability and durability.
Benefits and Applications
- Excellent thermal stability
- Special additives provide sludge and deposit control, and longer service life
- Excellent rust and corrosion protection for all system components
- Provide superior water separation and demulsibility
- Excellent anti-foam protection and rapid air release
- Provides anti-wear protection for pumps, motors, valves and other hydraulic circuit
components operating under high pressures and loads
APPLOICATION
- Hydraulic system operating under moderate to severe conditions in mobile and industrial service
- Older hydraulic system where leakage is a problem and cost-effective hydraulic oil providing all round protection is required
- Provides anti-wear protection for pumps, motors, valves and other hydraulic circuit components operating under high pressures and loads
- Mobile hydraulic fluid power transmission system and general machine lubrication
- Hydraulic applications in a wide variety of industrial, marine and mobile equipment
- Vane and gear pumps operating under high loads, as recommended by pump manufacturers.
- Severe service hydraulic systems, employing axial and radial piston pumps, as recommended by pump manufacturers
Technical Data
| SL | Properties | Units | Test Method | Results |
| 1 | ISO Grade | VG-46 | ||
| 2 | Color | ASTM D-1500 | RED | |
| 3 | Viscosity @ 40°C | Mm2/s | ASTM D-445 | 45.8 |
| 4 | Viscosity @ 100°C | Mm2/s | ASTM D-445 | 6.8 |
| 5 | Viscosity Index | ASTM D-2270 | 101 | |
| 6 | Density @ 15°C | g/ml3 | ASTM D-1298 | 0.842 |
| 7 | Plash Point | °C | ASTM D-92 | 210 |
| 8 | Pour Point | °C | ASTM D-97 | -24 |
| 9 | Total Acid Number (TAN) | mg KOH/g | ASTM D-974 | 0.4 |
| 10 | Rust Test | ASTM D-665A/B | Pass | |
| 11 | Foaming
Sequence-1 Sequence-2 Sequence-3 |
ml /ml ml /ml ml /ml
|
ASTM D-892 |
5/0 10/0 5/0 |
| 12 | Water separability @ 54°C, 40-37-3 | mins | ASTM D-1401 | 15 |
| 13 | FZG A/8.3/90 | LSF | DIN-51354 | 10 |
| 14 | Copper Strip Corrosion 3h at 100°C | Rating | ASTM D-130 | 1a |
| 15 | Air Release | mins | 7 | |
| 16 | Oxidation Stability, | ASTM D-943 | 4500 |
Health & Safety Environment
This product is unlikely to present any significant health and safety hazard when properly used in the recommended application and good standards of personal hygiene are maintained.
Avoid contact with eyes and skin, use proper impervious gloves with used oil. After skin contact, wash immediately with soap and water
